P1386 - Beam Clamp - Unistrut Midwest
Seismic design loads are for the 2 clamp installation as shown above. Must use clamps in pairs. Design loads are based on static testing with a safety factor = 5 based on ultimate strength of connection. Design loads apply only when used with 12ga. UNISTRUT channel. A 1/2" Chanel Nut and Bolt are required for installation.
P2786 - Beam Clamp | Unistrut
For use with beam flanges up to 3/4" (19.1 mm) thick. Use with Channels P1001, P1101, P2001, P3001, P5000, and P5500. When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.
P2787 - Beam Clamp - Unistrut Midwest
For use with beam flanges up to 3/4" (19.1 mm) thick. Use with Channels P5001 and P5501.
P1386 - Beam Clamp | Unistrut
Look for "UNISTRUT" on the part. Use in pairs only. Safety factor = 5 based on ultimate strength of connection. Requires a P1010 Channel Nut and 1/2" bolt.
Unistrut P2787 - Beam Clamp
U-Bolt Beam Clamp is designed with an adjustable height to be used with many Unistrut channels. This clamp has a High capacity for heavy load requirements and is easy to install. Vertical Design Load: 1,000 lbs per clamp (2,000 lbs per pair). Must use in pairs.
Unistrut P1386 - Beam Clamp
The Unistrut P1386 is designed to be used to clamp Unistrut channel perpendicular to the beam. Features: Vertical Design Load: Per table. Must use in pairs. Use with 12 or 14 ga. channel Set screw included. 1/2" screw and channel nut required for channel attachment.
Unistrut P1113 HG: 1" Pipe Clamp for Rigid Steel Conduit, Hot …
Unistrut P1113 HG: 1" Pipe Clamp for Rigid Steel Conduit, Hot Dip Galvanized. Unistrut pipe clamps, unless noted, are punch-press made from hot-rolled, pickled and oiled steel plates, strip, bar or coil, and conform to one or more of the following specifications: ASTM A1008, A575, A576, A635, A1011 SS GR 33, A1011 HSLAS GR 45, A1046 or A36.
P2676 - Beam Clamp - Unistrut Midwest
Look for "UNISTRUT" on the part. Minimum Safety factor = 7.0 based on ultimate strength of connection. 500 lbs Design Load applies at angles up to 15° from vertical.
P2489 Universal Girder Beam Clamp AI080 - Strut Channels …
This P2489 Universal girder beam clamp is designed to be used with Unistrut compatible strut channel systems that require girder suspension or attachment up to 22mm. Comes complete with mild steel cone pointed set screw that is zinc plated.
Unistrut C Beamclamp 25mm HDG - Abbots
Designed with a heavy-duty galvanized finish, this beam clamp ensures durability and resistance to corrosion. Ideal for securely attaching Unistrut channel to structural beams, it provides a reliable solution for both commercial and industrial settings, enhancing safety and …