The selection charts below are based on the specification of the Sonesse 40 motor for a 50mm Venetian blind using a 51 x 57 mm headrail and slat material of varying weight. The Sonesse 40 WT is an AC motor and requires a 230Vac supply feed across the neutral and one direction at a time to raise and lower a roller blind.
Somfy Documentation
Find related brochures, instructions, user guides and technical sheets of our products and smart home solutions.
SOMFY strongly recommends using a Tester Cable (T.C.) Cat. No. 6020086 to set the motor limits, and to ensure the system is operating correctly before the final electrical
Download Brochers, User Guides, Technical Sheets | Somfy
Find all the information you need about Somfy's products & smart home solutions on our website. Download brochures, user guides and technical sheets now!
How to Properly Wire Somfy Motors: A Step-by-Step Wiring Diagram …
A Somfy motor wiring diagram provides a visual representation of the electrical connections required to power and control the motor. It shows how the motor should be wired to the power source, control switches, and other components such as sensors or timers.
SOMFY strongly recommends using a Tester Cable (T.C.) Cat. No. 6020086 to set the motor limits, and to ensure the system is operating correctly before the final electrical connection is
The Somfy Curtain Motor Selection chart uses the maximum weight of a curtain (in Kg). An accurate Somfy Curtain motor selection differs between the track configurations and lengths of track. • It is recommended that you contact Somfy Technical services before using an electronic switching device(s)
IGC 4N1 MOTOR CONTROLLER (Shutter Mode) Installation and Operating Instructions Connect power and motors to the board (following wiring diagram at right). Only 1 motor per terminal. When motors are properly wired and power is applied to the board, the POWER LED will illuminate solid green and the motors will move to their upper limit.
ONE MOTOR/SINGLE POLE SWITCH CAUTION: Before proceeding with the line voltage wiring instructions, the up and down limits of each motor should be set using the SOMFY tester cable (Cat. No. 6020086). Refer to the limit switch instructions packaged with each SOMFY motor for more information.
Because of the type of motor (Asynchronous with built-in capacitor) and the built-in limit switches, it is important to follow two important recommendations to assure proper operation of the motorized systems - SOMFY Operators are not universal motors. 1. Do Not Wire SOMFY Operators in Parallel (Does not apply to RTS or ILT motors).