MEC reloading chart - Shotgun Forum
2013年9月16日 · I'm reloading with a MEC 600 jr. press with a 1 1/8 oz bar. I'm using a W209 primer, WAA12 wad, Nitro hull and Universal powder. The Hodgdon website says to load 21.5 grains/1200 fps or 23 grains/1255 fps, and the MEC powder bushing chart says to use #28 bushing for 21.6 grains and #30 for 23.3 grains.
Perfect Pattern & MEC bushings - Shotgun Forum
2023年10月14日 · Not just Mec bushings! I’ve loaded rifle and pistol for years (decades). Shotgun, I reloaded for back on the 80, stoped and recently just got back into it. In all my time reloading I have never found any powder measure that uses anything that resembles a bushing, little dandy, autodisk, autodrum, Mec, Load all, etc. drop what it’s supposed to.
steel shot reloading recipes wanted for skeet | Shotgun Forum
2011年2月2日 · I use the BPI VP53 wads also with 19.5 gr of green dot. fills the hull, great crimps. I had a problem with my MEC pulling the wad up also, changed out the shot drop tube for a 20 ga tube and problem solved. The VP53 has a ridge inside that is a tight fit for a 12 ga tube.
lee load all vs mec 600 jr, for beginner - Shotgun Forum
2011年7月3日 · okay, so I'm now thinking of the lee reloading scale and a MEC Charge Bar for Single Stage Press Lead Shot 7/8 oz, bushing will depend on the powder type, right Click to expand... Yes powder bushing will depend on powder choice and recipe.
My first MEC is a 9000 GN - Shotgun Forum
2024年1月9日 · Check your reloading charts first and/or send shells in to get pressure tested. Again, lots of reading on those subjects on here. What is stack height---lots of reading on here. You will find that some published recipes are "safe" but don't fit very well. If the stack height is too tall shot can dribble out or not allow a good crimp.
Mec 600jr instructions and conversion - Shotgun Forum
2023年3月1日 · 20 Gauge 600 Jr. Mark V Single Stage Press by MEC Product Overview The MEC 600 Jr. Mark V is the most efficient way to reload on the market today. The machine is self-inclusive, so no need for a vice, drill press, hand drill, or spinners. Seasoned gunners will like the features provided by...
Reloading recipes - Shotgun Forum
2020年8月7日 · Only use recipes that are published. It appears you have a lot of different hulls and a bunch of Remington components and it's not at all clear what it is you want to load for, other than maybe some buck shot. Instead of being so general in what you want to load, you should spell it out for us. Just what are your objectives in reloading?
Clays recipes - Shotgun Forum
2011年3月14日 · Loader MEC 9000 StS or Nitro Hull Wolf primer Clays powder @ 18.3 gr CB WAA12sl wad What do you more experienced loaders think of this load? (note through a chrony these loads are not consistant! I dont care about fps just being consistant)
20 Gauge Reloading recipe - Shotgun Forum
2011年3月21日 · The RXP20 wad is not well thought of as near as I can tell. I do have a few issues with it. Has to be set in there carefully or it will not seat correctly. Seems to be a little on the finicky side. I have not used any other wads on the Mec Jr, do most of the reloading with a 12 gauge MEC 9000. Still the shells seem to reload ok and go bang just ...
MEC Charge bar confusion - Shotgun Forum
2023年10月29日 · As a reminder, Mec offered a "T" marked red bar meant to take Texan bushings in 302 and 502 types. About .812" powder side hole and .875"(7/8") shot side holes. Could use Texan or Lyman Easy loader bushings. This was between Mec's fixed bar time and the Mec bushing bar we have now.