Installation Guidance | James Hardie
Find the technical documentation you need to build your James Hardie project from start to finish. From clearance requirements to installation videos to CAD files, we've got you covered. © 2024 James Hardie Building Products Inc. All rights reserved. ™ or ® denote trademarks or registered trademarks of James Hardie Technology Ltd.
BEFORE INSTALLATION, CONFIRM YOU ARE USING THE CORRECT HARDIEZONE® PRODUCT INSTRUCTIONS BY VISITING HARDIEZONE.COM OR CALL 1-866-942-7343 (866-9-HARDIE) Store flat and keep dry and covered prior to installation. Installing siding wet or saturated may result in shrinkage at butt joints. Carry planks on …
How to Install Lap Siding | James Hardie Pros
2024年3月28日 · First, make sure you review the Hardie® Plank lap siding installation instructions, which contain the information you need for proper installation. To help you get started, we'd recommend checking out this helpful video, which shows you how to cut and install starter strips and how to stagger lap siding for improved appearance.
How to install Hardie ® Backer cement board on walls - James Hardie
2024年4月9日 · Learn how to install Hardie® Backer cement board on walls and the appropriate materials and tools that you’ll need for the job. If you’re working on a tile project for the walls of a kitchen or bathroom, you’ve likely already selected a tile or stone slab.
BEFORE INSTALLATION, CONFIRM THAT YOU ARE USING THE CORRECT HARDIEZONETM PRODUCTS INSTRUCTIONS. TO DETERMINE WHICH HARDIEZONETM APPLIES TO YOUR LOCATION, VISIT WWW.HARDIEZONE.COM OR CALL 1-866-942-7343 (866 9HARDIE) Store flat and keep dry and covered prior to installation. Installing siding wet or saturated may result in shrinkage at butt.
HardieTrim Boards - Installation Instructions. FLASHING/CLEARANCE REQUIREMENTS NO-COVER HardieTrim@ Boards At the juncture of the roof and vertical surfaces, flashing and counter flashing shall be installed per the roofing manufacturer's instructions. Provide a 1 in. clearance between the roofing and the bottom edge of the trim.
Fasten HardieBacker cement board with specified nails or screws (as listed in “Materials Required") every 8 in over the entire surface. Keep fasteners between 3/8 in and 3/4 in from board edges and 2 in from board corners. Prior to setting the tile, fill all joints with the same mortar used to set the tiles.
hed installation instructions. Failure to install and finish this product in accordance with applicable building codes and James Hardie published instructions may lead to personal injury, affect system performance, violate local building codes, and .
cribe design and general installation information for specific James Hardie products. The appendix addresses the installation of James Hard.
During installation or handling: (1) work in outdoor areas with ample ventilation; (2) use fiber cement shears for cutting or, where not feasible, use a HardieBlade saw blade and dust-reducing circular saw attached to a HEPA vacuum; (3) warn others in the immediate area; (4) wear a properly-fitted, NIOSH-approved dust mask or respirator (e.g. N-...
- 某些结果已被删除