Treadmill turns on, incline works, but belt won't move.
Hi, I got an issue with my treadmill. It turns on.. I can make the incline go up and down.. but when I press start the belt won't move. I've tested the motor with an external power supply to see if that was the issue by hooking it up to a cordless drill's battery and the belt moved.. so …
Incline/Decline won't stop! — Treadmill Doctor Forum
Incline increase or decrease button. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system. If the incline does not begin calibrating, press the Stop button again, and then press the Incline increase or decrease button again. When the incline is ...
Proform treadmill incline not working
I have a preform 400S treadmill that the incline just quit. One day I got on it, it was in the level 5 position, after I started the machine, it went to flat on its own and it hasn't moved since. I have replaced the incline motor with no luck and now I have …
Sole F80 incline error - Treadmill Doctor Forum
I have a Sole F80 serial# 5808101008003878. bought in 2010. It now shows error code E2 Incline error. I can still walk on it the incline just doesn't work.
NordicTrack 6.5 s incline problems — Treadmill Doctor Forum
I have calibrated the incline with no change in function. Any thoughts on this? My inclination (pun intended) is that I need to replace the incline motor, but I have no experience doing anything beyond lubing and tightening the belt, so I don't know what other diagnostics are available or problems may tend to arise.
Proform Pro 2000 Stuck in Lowest Incline Tilt Will NOT Recalibrate
Intriguing case, indeed! The combination of a stuck decline, failed recalibration, and manual incline issues suggests something's mess with the Proform Pro 2000's incline system. It could be a sensor malfunction, motor trouble, or even a mechanical blockage.
Treadmill incline not working — Treadmill Doctor Forum
2023年9月25日 · Hello all. Over the weekend, I picked up a used Nordictrack 2950 model NTL22113.1.
Sole F63 - "ERR" Incline Error after declining - Treadmill Doctor …
Sole F63 (563888) Calibration procedure: 1) Remove the safety key 2) Press and hold down the Start and Fast (speed up) buttons with one hand and
Belt and incline won't move but everything else appears fine
Board came back looking like new, all capacitors clearly replaced, and they said that after repair the controller successfully ran the motor on one of their in-house treadmills (albeit not a Proform Performance 1450). But alas, the repaired control board still doesn't run my treadmill To make matters worse, the incline no longer works either.
X7i Incline Problem — Treadmill Doctor Forum
I just recently replaced the incline motor on our NordicTrack X7i. Ran the calibration, but the zero setting is not near level. More like -1 or -2. I have to set the incline to level 5 for the treadmill deck to be near level. Is it possible I missed a step when installing the incline motor? Any suggestions would be helpful.