Front Wheel Alignment - SpyderLovers.com
2018年8月3日 · I've been studying a procedure from Lindsay Whipp for making the jig that is attached to the front wheels of the Spyder and attaching Laser levels to the Jig. I had to adjust measurements to fit my RT but made a jig from 1/2 inch cabinet grade plywood.
Can am Spyder Wheel alignment - YouTube
2014年5月8日 · Simple Wheel alignment at home without using any complicated tools or BUDS. By Adrian Iredale
Wheel alignment specifications - SpyderLovers.com
The unfortunate truth about front wheel alignment on a Spyder hinges around several factors. Rider or if two up rider(s) weight, ride height setting, spring rate, and even swaybar choice can influence best setup.
Front Wheel Alignment Instructions: Pg 1 Front Wheel Alignment Kit for Can-Am Spyder. The Alignment Kit consists of : 2 yellow Shinty LE007 magnetic-base Laser Levels ( batteries included ) NB: These levels are accurate but made of plastic. They may be knocked out of alignment if handled roughly or dropped. Please treat them with care;
Everything you need to know about DIY alignment - Can Am Spyder …
2015年6月22日 · Simplest way is to get two pieces of 1x4x24" lean them against the outside of the tires and take your measurements. Adjust each tie rod to achieve the proper toe (3/8") Method #2 use a standard alignment fixture which mounts to the rim that has an arm at the bottom which is 24" long and allows the tape measuring front and back.
Front wheel alignment tips and guidance - Can-Am ATV Forum
2008年3月27日 · Can-Am says, (as someone has mentioned) toe is 0 degrees. I add a little toe in, total toe of around 1/8" ( that's 1/16th each side) for the high speed stability, but not enough to effect tire wear and slow steering. Castor, does help with steering effort, but makes it too darty and numb feelfor me. Good luck
Having proper wheel alignment DOES make a Spyder much easier to ride! Scaling it up: The ‘Alignment Box’ Method. Measuring small distances is very difficult. So the laser is used to describe a ‘box’ about the size of the entire bike, so that the toe-in over this greatly-expanded distance can be measured more accurately. It just
laser alignment - Can-Am Spyder Forums
2023年3月27日 · Whether single or dual riders, each Spyder shows 0.02 degree toe in on each wheel, which is 0.04 degree total toe. I do this for everyone so that they can see their alignment as the vehicle travels on the road.
DIY Laser Align with DIY Tool - SpyderLovers.com
2023年1月15日 · The whole idea is to align the front wheels off of the rear wheel. The lasers are simply a very accurate tool with which to accomplish this. Properly done, it is actually a 3 wheel alignment. If you are using the rear wheel as the basis for your front wheel alignment, then you are on the right track.
This document replaces a comprehensive step-by-step set of instructions for performing wheel alignments, using either a wheels-off or a wheels-on method. However, time has shown that the wheels-off method, while quite accurate, is just too hard for the average DIY-er to follow – …
- 某些结果已被删除