Sharpener for 20" Planer Blades - FineWoodworking
2007年9月11日 · I mount a 6 inch, 60 grit grinding wheel on the arbor and face it off with a star wheel dresser. Then I tilt it to 45 degrees. After removing the planer and jointer blades from my Makita 2030 12 inch planer/6 inch jointer combination machine, I mount them one at a time on a 20 inch long, maybe 7 inch wide, piece of 3/4 inch plywood - a "sled."
15 to 20 inch planers - FineWoodworking
2006年12月28日 · I have a Dewalt 13″ planer that I was happy with until I got a Grizzly 8″ Jointer. Now in comparison to the jointer the planer seems underpowered, slow and very, very noisey. I am thinking about selling my current planer and buying a heavier 15 to 20 inch planer. I would love comments and advice from anyone who has this size planer.
DJ-20 or Grizzly G0490 8 inch jointer?? - FineWoodworking
2008年3月5日 · The DJ-20 had a pretty cheap on/off switch on the base cabinet. It was hard to press on or off. The Shop Fox had the switches on the pedestal and was a magnetic switch. It just appeared that there was more effort to make the Shop Fox a quality machine. It appeared that the Delta DJ-20 gave me the impression.
Planer 15″ or 20″…? - FineWoodworking
2006年10月1日 · Im considering a 20″ but since Im going to focus in making kitchens I guess a 15″ planer is more than enougth. Is there a reason to buy the 20″ planer? it costs 1000.00 more. The 15 ” is the delta X The 20″ is a Silverline( I havent seen this brand in the US) Both planers are 3HP and have similar feed rate. Thanks.
15", 3 HP Planers less than $1500 - FineWoodworking
2005年1月19日 · The 15 inch is a bit heavier when cranking up but I don't feel that it is all that heavy. My 13.5 inch is my fine cut planer and the 15 incher is my hoggin' machine. The 13.5 inch machine has a nice fine cut and the machine marks are quickly sanded or scrapped out. The other machine I took a close look at was the DeWalt 13.5 inch.
Thickness planer recommendations - FineWoodworking
2022年2月15日 · John, On my 20" planer the Infeed and Outfeed Tables rise up and down approximately 8". The I/O Tables are about 2" thick. The range of the table surface from the floor is approximately 27" to 35". There is a warning not to lift the planer by the I/O Tables. Here is a Powermatic video of the 15HH Set Up:
20 Inch Powermatic Planer - FineWoodworking
2024年3月25日 · 20 Inch Powermatic Planer user-210490 | Posted in General Discussion on March 25, 2024 05:37pm I’ve had this planer for at least 15 years, done thousands of board feet, and the blades finally need to be replaced.
which planer to choose - FineWoodworking
2007年5月15日 · I have been looking at 20 inch planers also, except I was trying to determine the difference between the various offerings of the same planer. There is a thread further down the list where a lot of use full information was provided by the knot heads. What I decided to do was order the Grizzly G0454 and the Shelix spiral cutter head by Byrd tool.
Sharpening Delta Planer Blades - FineWoodworking
2010年9月23日 · Has anyone had any good results from sharpening Delta 12 inch planer blades? I am going to have to try, I have too many dull blades, but really unsure of the best method. I have a Spyderco knife sharening system and I am thinking of just eyeballing the blade on the ceramic rods. Anyone have a better idea?
Makita 2030 Planer Blades - FineWoodworking
2009年9月13日 · I'm not sure if there was a jig supplied by the company that helped position the planer blades in a Makita 2030. There are two milled flat areas on the machine though, that straddle where the blades peek through the top (covered, when in …