Complete Rookie - Shopsmith 10ER Lathe/Drill Press
2021年7月14日 · Don't get the 7 Piece Multi Spur Drive Center Set. It is important to know that the Shopsmith has a 5/8" reverse tapered spindle for the drive side. That is different from what most stand alone lathes have. As John said get a Shopsmith Lathe Drive which is $29.99 new from Shopsmith or a used Shopsmith one.
Shopsmith 10ER Lathe Parts Needed - Shopsmith Forums
2021年9月23日 · Re: Shopsmith 10ER Lathe Parts Needed Post by SuperDave402 » Fri Sep 24, 2021 6:01 pm chapmanruss wrote: ↑ Fri Sep 24, 2021 4:43 pm Since the Model 10ER has been out of production since the end of 1953 all parts must be found on the used market or finding someone fabricating them.
Shopsmith Model 10ER - Shopsmith Forums
2020年11月13日 · The Shopsmith Model 10ER was made from 1949 through 1953 with the Model 10E starting in 1947. Your Shopsmith has some things in common with todays new Shopsmith, the Mark V 520 and the Mark 7. All Shopsmith Model 10's and Mark series tools have the same size 5/8" reverse tapered spindle for attaching Arbors, Spindles, Chucks and Drives to.
Model 10E... worth it? - Shopsmith Forums
2020年10月4日 · It is easy to tell what Shopsmith it is by simply looking at the Logo/Serial Number plate that is mounted on the front of every Model 10. It will say Model 10E, Model ER or Model 10ER. ER and 10ER are both Model 10ER's. Below is a picture of one of my Model 10E's. Note the red and silver Logo/Serial Number plate on it.
Shopsmith 10e Information - Shopsmith Forums
2024年10月18日 · Some current accessories can still be used on the Model 10's like a lathe drive. I have three of the original 250 Shopsmith Model 10E's made (2 restored and 1 being restored) and can use a brand new Lathe Drive on it just as I can use the Lathe Drive that originally came with one of those 10E's on a brand new or my Mark 7.
What's so great about the Shopsmith 10E's & 10ER's anyway?
2020年9月28日 · I already knew the Shopsmith history from about the mid 1960's to the early 1970's is spotty at best. I wouldn't have guessed that the history prior to 1964 was more well known. Just so I make myself clear. I was not attempting to start a debate, or put down the Shopsmith 10E's & 10ER's, or their owners.
10E - Shopsmith Forums
2017年12月27日 · The good news is any Lathe Tool Rest assembly, or parts from it, made for the Model 10E or 10ER will fit. If you need just the 8" Tool Rest part # 105-1 any Model 10 or Mark5/V/7 one will fit even a brand new one from Shopsmith. The other parts are specific to the Model 10's. The 3 Set Screws are common 3/8"-16 x 1/2" or 3/8"-16 x 3/8" with cup ...
Bringing back to life: Shopsmith 10E & 10ER
2022年12月12日 · It looks like you have most of the basic parts to both the Model 10E and 10ER. Here is a little history for your Model 10's. Based on the serial numbers (10E S/N E-2390 and 10ER S/N 58599) they were both made in the Eastern Plant. E-2390 probably in 1948 and 58599 likely in late 1951 or 1952.
Which older Shopsmith as a lathe? - Shopsmith Forums
2023年2月9日 · The Shopsmith Model 10E & 10ER has a lathe capacity of 33" with a 15" swing as listed in its brochure. I can do turnings up to 13" in diameter and spindles up to 33" long or longer if I made an extension. Some creative owners have made extensions for their Shopsmith which include both Model 10's and Mark series tools.
Everything E / ER - Technical info, documentation, links - Shopsmith
2010年1月25日 · Shopsmith 10E & 10ER Resources The Shopsmith 10E (10Experimental) and later 10ER (10Experimental Revised) was invented by Dr. Hans Goldschmidt after WW2. They were manufactured from late 1947 until the Mark V was introduced in 1954. Everett Davis has done a lot of excellent work restoring and enhancing Shopsmith documentation.