GM Gen III LS PCM/ECM: Tuning Software and Equipment - LS …
2015年2月13日 · GM Gen III LS PCM/ECM: Tuning Software and Equipment includes instructional photos, checklists, and step-by-step instructions on upgrading to the GM Gen III LS-Series PCM, ECM, Electronics, and POWERTRAIN CONTROL SYSTEMS
Reflashing the PCM. Manual Swap Edition 2023 Flash ECU...
2023年11月25日 · Wrote the OS to the ECU. After the ECU was complete the next prompts were to pair the PIM to BCM, which the security codes were needed. Just takes a moment to pair the modules, follow the prompts for the keys, and then the process is complete.
Reflashing an ECM, and linking ECM/PIM/BCM modules on an...
2024年9月5日 · Proceed with "PIM (GMLAN) Link to ECM (GMLAN)," and then click "Next." ⬇⬇⬇ Enter the 4-digit "IMMO" code from your dealer keycode print out or "Security Code" from your security card.
Using LS Droid with OBDLINK MX - GMTNation
2020年6月17日 · Thought I'd start a new post for tips, tricks, and recommendations reflashing an ECM/PCM using "LS Droid" with a "OBDLINK MX +". Does anybody have any recommendations on how I should proceed using this application on a P01 & P59 PCM as well as a Envoy/Trailblazer PCM?
Programming Services - LT1 Swap
PCM Reprogramming Services - PCM Programming service for your engine swap project or stock vehicle. I program all swap PCMs to remove anti-theft system that will cause a "start and die" condition. Sometimes this is referred to as VATS. I enable cooling fans for all swap applications, and change fan on and off temperatures.
LS Tuning For Optimum Performance - LSX Magazine
2024年8月12日 · To handle MAP (Manifold Absolute Pressure) measurements above 1 bar, it’s necessary to install a 2- or 3-bar MAP sensor and reflash the ECM with the appropriate EFILive custom operating system- which can adequately interpret the readings when manifold pressure is above atmospheric (14.7 psi) maximums.
EEHack w/ Free Flash Tool! - LS1LT1 Forum
2015年11月29日 · This flash tool has a ‘take any long shot to save your ecm’ philosophy to error recovery, which, on any unrecoverable error, tries its best to regain control, erase the chip again, and start over. It also tries to verify your serial connections …
What do we like for LS-swap ECUs? - Grassroots Motorsports
2021年1月2日 · I'm doing the preliminary planning for my LS swap, and am curious about opinions on controlling it and the transmission. Right now, the plan is for a 3rd gen engine, hopefully a 6.0 LQ4, cable throttle, and a 4L80E transmission.
LS SWAPS: Engine Management Systems Guide
2015年3月9日 · For instance, a 1999 F-Body LS1 with a drive-by-cable throttle body can be wired to a 2000 Corvette drive-by-wire ECM, but the ECM must be reprogrammed to reflect the drive-by-cable change. You can also convert an engine to drive-by-wire by reprogramming the original computer for drive-by-wire, but you must be able to plug the wiring harness ...
ECU Reflashing Services - ECM, PCM, TCM & BCM - Dirty South …
GM Holden Factory Reflashing Services – using HP Tuners, we can reprogram your Factory ECM PCM or TCM. No LS Conversion is complete without a full VATS Delete or VATS Removal. VATS, or Vehicle Anti Theft software, is, as the name suggests, GM’s in house anti-theft software.